Environmental Advantages Of Using Houston LED Lights

Benefits Of LED Lights To The Environment In Houston

Today, conserving the environment must be a duty that every person should feel obligated to perform. We are all aware of various eco-friendly policies such as recycling to reduce the waste we create and minimize our carbon footprint. But, a majority of the population does not know about the latest and emerging technologies that we can utilize to cut carbon emissions. One excellent example is LED lighting, which helps to keep the environment clean.

Energy Saving

LED lighting exceeds the efficiency of traditional lighting such as incandescent and fluorescent lights by up to 80%. They have a 95% energy conversion rate, only 5% of LEDs energy goes to waste as heat. This is in contrast to fluorescent lighting which wastes as much as 95% of the energy, just 5% is turned into the light! Also, LEDs draw lower power compared to traditional lights: a normal 84-watt fluorescent can be substituted by a 36-watt LED to generate a similar amount of light. Energy-saving characteristics minimize the need for energy from power plants and reduce gas emissions from greenhouses.

Because LEDs consume more low-cost energy in comparison to an incandescent bulb, there is a huge reduction in power expenses, and consequently, a drastic fall in your monthly utility bills. Energy and money are saved on servicing and replacement expenses because of the durability of LEDs.

Free From Toxic Substances

LED lights are clean and without toxic substances. Most commercial buildings are currently using fluorescent strip lights that carry harmful substances such as mercury. This will pollute the surroundings when dumped in a landfill. Discarding such waste has to be done through a certified waste management provider, thus upgrading to LED lights eliminates the time and cost required for compliance during disposal, at the same time it keeps away additional toxic waste from the environment. LED is also considered clean or eco-friendly and can be recycled.

Fewer Lights Required

LEDs possess superior light distribution capabilities and focus light in a single direction in contrast to other kinds of light that misuse energy by radiating light in every direction, often providing light to sections where light is inessential like the ceiling. For this reason, a lower number of LED lights are required to attain a similar degree of brightness produced by incandescent and fluorescent lights. Lesser lights will cut energy usage, and this will be an advantage to the environment.

Long Active Life

A longer expected life implies reduced carbon emissions. LEDs have an expected life of almost 60,000 hours whereas incandescent bulbs have a standard lifespan of 1,500 hours. A good LED light can function properly when in regular use for more than 7 years before requiring replacement. LED lights remain functional for six times longer than other kinds of lighting, reducing the need for repeated replacement. As a consequence, fewer lights are used, therefore, lesser resources are required for production, packaging, and distribution. The prolonged life span of LED lights will drastically cut maintenance expenses and reduce long-term running expenses in contrast to traditional fluorescent and Lamoureux lights.

If you would like to discover more tips and tricks from Robert Huff Illuminationsvisit our blogCall or contact us today for more information!

The Works That You Should Leave To A Professional Electrician In Houston

4 Projects Only A Certified Houston Electrician Should Handle

Faulty grounding, overloaded circuits, and poor wire connections are some of the mistakes you don’t want to do in your home. These will most certainly put your loved ones (including yourself) at risk. Certified electricians undergo extensive training, which helps them understand the various electrical codes. It doesn’t cost much to have a certified electrician diagnose and fix any electrical problems you might have. While you might be able to handle various electrical installations, here are 4 projects that are best handled by a licensed electrician.

1. Circuit Breaker Upgrades

There are times when you are required to have your electrical service panel or circuit breakers upgraded to support the current electrical needs. Maybe you had a few more appliances installed in the house, the lights are flickering, or you keep blowing up a fuse. Having the circuit breaker upgraded could solve the problem. While it may seem like a simple job, upgrading a circuit breaker panel isn’t an easy job. Many factors have to be put into consideration to ensure it supports all the appliances and current required. That said, only a certified electrician should be allowed to handle such projects.

2. Adding GFCI Receptacles, Outlets, USB Ports

If you need a few extra power outlets in the house or need GCFI upgrades, then an electrician is the person to call for the job. Electricians understand that GCFI outlets are essential in high-risk areas such as the kitchen and the bathroom, which is why you should have at least one of these outlets installed. GFCI outlets are designed to cut power or electricity if the line comes in contact with water. This thus reduces the risk of shock and unbalanced electrical load.

Improper grounding is one of the leading causes of shock, loss of power, and even electrical fires in many homes. An experienced electrician should be able to handle the installations expertly and also add any outlets and USB ports in the house safely. Adding some of these outlets entails cutting into the wall. A trained person will know just how this should be done to prevent damage and do a clean job.

3. Outdoor Lighting

Security and ambient lighting come in hand in many homes. If looking to add a few more security lights or outdoor lights into the compound, you might as well call a certified electrician. He/she should be able to thread the wiring and even ground it properly to reduce potential risks. The electrician will not only handle the installations but also advice you on the best lighting elements for the job. Any part used for outdoor lighting should have the capacity to withstand the harsh weather outside.

4. Replace Light Fixtures

Many homeowners can replace light fixtures with ease. There are however instances when you aren’t sure what or where to get the replacement fixtures from. Several factors such as load, amperage, and whether the existing wiring supports the fixture ought to be considered before replacing one. Nonetheless, a qualified electrician should be able to identify and determine the right accessory to use for the same. Other factors that the electrician will consider are high-temperature insulation (not present in older homes) and a strong ceiling mount.

Unless you are sure of what to do, always call a certified electrician to help with any electrical project you have. This will save you from trouble and money too.

If you would like to discover more tips and tricks from Robert Huff Illuminationsvisit our blogCall or contact us today for more information!

Thoughtful Ideas For Choosing A Houston Porch Light

Shopping A Porch Light In Houston: Tips & Tricks

The right porch light does more than just let you see your way around obstacles when it’s dark. Ideally, it’s also something that commands respect while inviting friends and family to your porch. When a porch is lit up enough, it means that the surroundings of your entrance are safer, as possible intruders are deterred. Picking out a good porch light isn’t really different than selecting a good piece of jewelry. You just need to be thoughtful about it while paying attention to detail.

Placement

Where you intend to put your porch light should guide you in picking out the best one. For instance, if you’re looking to replace a current wall light, then your options are limited to just wall-mounted fixtures. If you’re going to add porch lighting, then you have more options, but you also have to verify your circuit capacity in advance. You can put porch lights on any posts that support the roof of the porch, or you can put them on the ceiling, using either flush-mount or hanging options. If you decide to, you might even install recessed lights right into the porch floor. Weather is not likely to be a factor since manufacturers design their porch lights to get used outdoors.

Style

There are times where the architecture of your home impacts what kind of fixture is best; having said that, if your home is lacking in specific characteristics, you have the more creative freedom to enjoy. Porch lights are available in quite a few styles, with certain options being casual, traditional, contemporary, rustic, and Southwestern, as well as many more. If you want to light up your colonial-style home, then you should lean more towards traditional styles over rustic options, for instance. Still, even in colonial styles, particular aesthetics can matter, since a Cape Cod looks better with nautical lighting than Georgian colonials do. Whatever fixture style you do pick, just make sure you emphasize consistency over being eclectic.

Size

How big your porch light is needed to be a balance between the home’s overall size and the size of the entry door. If your door is the standard size of 6 feet 8 inches, then industry experts suggest your porch lighting be from 5 up to 9 inches in width. If your entry door is in the realm of 8 feet in height, then your porch light should follow suit at 10 to 12 inches wide. If you decided to install more than one light for your porch, be sure that they are all the same width and size, or at least relatively close; this holds true for wall lights, hanging lights, and flush mounts.

Functionality

A lot of decorative porch lights now come with photoelectric eyes in-built for dusk-to-dawn function, which means you don’t have to ever remember to turn them on or off. Motion-sensor porch lights also have timers built-in that turn them on when the sun sets so they stay lit for predetermined times you set. Once the light goes off, it reactivates when the motion sensor registers movement. Take note of the wattage recommendations of fixtures if you are in need of bright porch light. Never exceed the recommended wattage, or you might risk damaging your light. If you want to boost the brightness without going past the wattage of a fixture, swap out incandescent bulbs with LED or compact fluorescent bulbs.

If you would like to discover more tips and tricks from Robert Huff Illuminationsvisit our blogCall or contact us today for more information!

A Complete Guide To Cleaning Your Houston Outdoor Lighting Fixtures

Cleaning Outdoor Lighting Fixtures In Houston: Tips & Tricks

The reason why many invest in outdoor lighting is that it illuminates the entryway as well as the driveway and walkway. Furthermore, they also help improve security. Another reason as to why exterior lighting is considered to be a good investment is because they also enhance the appearance of a house and adds character at the same time. However, when these outdoor lightings start to get old, they begin to oxidize and lose their beauty. When this happens, you can choose to get rid of the oxidation instead of replacing all the exterior lightings.

Cleaning your homes exterior copper or decorative metal or brass lighting fixtures can improve your outdoor lighting as well as the curbside appeal of your home. Moreover, different fixtures are cleaned using different cleaning methods. Here is a step-by-step guide on how to clean some of these outdoor lighting fixtures.

Cleaning Copper, Lacquer-coated Brass Or Metal Lighting Fixtures

Here are the things you need for cleaning copper, lacquer-coated brass or metal lighting fixtures:

  • Protective Gloves
  • Step Ladder
  • Hot Water
  • Flat Paintbrush (for removing dust)
  • Old Towel
  • Screwdriver
  • Two Utility Buckets
  • A Soft Piece Of Clothing For Cleaning
  • Glass Cleaner
  • Liquid Dishwashing Soap
  • Liquid Wax (optional for added protection)

Step # 1

Before you start cleaning your outdoor lighting fixtures, the first thing that you need do is make sure that they are turned off. Check all the switches before proceeding on. After that use a noncontact voltage sensor to test whether the outdoor lighting fixtures are turned off correctly. Place the noncontract voltage sensor against the electrical box and hold a dusk-to-down photocell. If the outdoor lighting fixtures are turned off correctly, then the lights will automatically turn off and on.

Step # 2

On a flat surface, carefully place the ladder close the o the outdoor light fixture.

Step # 3

Make sure you have your protective gloves on.

Step # 4

Carefully remove the bulbs so that it can be easy for you to clean both the outside and the inside of the light fixtures. Try to untwist the top or the bottom of the fixture so that it can be easy for you to reach the bulb.

Step # 5

Get rid of all spider webs, dust and bug debris using an old household paintbrush.

Step # 6

Besides removing the bulbs, you also have to remove other decorative items such as globes, shields and even grills. Us a screwdriver to remove these items without damaging them and store them on a soft surface.

Step # 7

Use the two utility buckets to create suds by mixing dishwashing soap and hot water. After that, it is advisable that you test the cleaner on s small section before you can proceed on to cleaning all the lighting fixtures.

Step # 8

Soak the miscellaneous parts that have been removed and the shied in a bucket filled will clean soapy water.

Step # 9

Use a soft piece of clothing or a sponge to clean the remaining parts of the fixtures that cannot be removed. However, make sure that you do not wet the electrical sockets when cleaning. If the accidentally reaches the sockets, then use a dry piece of clothing to rinse the soapy water.

Step # 10

After that make sure that you remove other parts of the fixtures from the water including the shield and the globe. Use clean water to rinse these items and dry them using a clean towel.

Step # 11

Use paste wax of nonabrasive liquid polish to make your metal surface shine again. You can also use car wax to do this if you do not have paste wax or nonabrasive liquid polish. However, make sure that the surface is dry before you start on the outside part.

Step # 12

To shine and clean the glass panes as well as the surface and shades, use a commercial glass cleaner. Also, remember to clean the exterior of the light glass using paper towels or a glass cleaner.

Step # 13

Clean the light bulbs using a damp piece of clothing. After that, you need to reinsert each bulb carefully and then reassemble the fixture. Do not switch on the circuit breaker until the fixtures have completely dried off.

Here are the things you should not do when cleaning outdoor lighting fixtures:

  • Avoid doing the following things so that you do not end up damaging the protective lacquer coating
  • Avoid using chemical-based cleaners.
  • Avoid using a piece of clothing that is not soft.
  • Avoid using products that contain alcohol or ammonia.

Cleaning True Brass, Copper, & Artisan Outdoor Lighting

Cleaning cooper or real brass lighting can be done using various kitchen ingredients such as salt and lemon. Furthermore, the ingredients are easy to find and very effective at clearing copper and brass fixtures. Here is a step by step guide on how to clean copper and brass suing kitchen ingredients.

Salt & Lemon

Gently remove any small spots of tarnish from the copper or brass by slowly rubbing the lemon onto the surface. To get good results, make sure that you mix both the salt and the lemon juice using equal measure. Use a soft piece of clothing to rub the paste on the surface so that it can be easy to remove the dirt. Fill a bucket with warm water and use it to rinse the surface before drying it at the end.

Baking Soda

Baking soda is considered to be an eco-friendly alternative for cleaning outdoor lighting fixtures. All you have to do is mix baking soda with lemon juice to create a unique paste. The paste is then applied on a soft piece of clothing which is used to clean the surface of the fixtures. If you come across tough stains, use baking soda alone to get rid of the stain. Using the same procedure, apply baking soda on a soft cloth and rub on the surface. After removing all the dirt, remove the paste by washing it off using water and a mixture of vegetable-based soap.

Our Legacy

Robert Huff Landscape Illumination has been working in this industry for more than 30 years. Our company is licensed by the State and insured. We deliver services to clients who are located in Houston, TX. We also cover other areas such as Austin, TX. Our services are open to both commercial and residential clients. Our team of trained and experienced staff will make sure that your lights are in good condition and working properly. Furthermore, we offer quality services at an affordable cost.

If you would like to discover more tips and tricks from Robert Huff Illuminationsvisit our blogCall or contact us today for more information!

 

Knowing How Our Outdoor Lights Are Wired In Houston

Tips For Wiring Your Houston Outdoor Lights

Like other types of light, most outdoor lights need electricity to operate. That electricity is usually provided through wires. Having said that, there is no need to panic about your outdoor space getting overrun with wires. Most wiring for outdoor lighting runs underground, meaning that you won’t even see the wires after they are in place. Any above-ground wiring is usually designed to blend with the surrounding area so that it isn’t noticeable at a glance. Read on to get some helpful tips on wiring outdoor lights.

Every lighting situation requires a unique solution when it comes to wiring. For instance, the type of lighting that you choose for a pathway will usually be a lot different than what you choose for a driveway. The section below outlines some of the most popular ways to wire outdoor light fixtures.

Understanding Transformers

If you use transformers to power your outdoor lights, each light fixture is wired to the transformer. The wires themselves can either be above or below the ground. The transformer is then plugged into an outdoor outlet. Below is some more information so you can get a better idea of how these devices operate.

Transformers help your lights work in one of two ways: they either use a photocell or a timer. Transformers that operate on a timer are designed to automatically turn the lights off or on at specific times of the day. Transformers with a photocell, on the other hand, automatically detect the level of light outside, turning the lights on when it gets dark and shutting them off when it gets light. Transformers like these are popular for use in ponds.

Wiring The Lights To A Switch

Nothing is quite as satisfying as turning on a light switch and having your whole outdoor space light up. Wiring your outdoor light fixtures to a switch inside your home is a great option. There are a couple of different methods that you can use to accomplish this. The first is to wire the lights directly to the switch. The second option is to wire the lights to a transformer that is plugged into an outdoor outlet. The switch inside your home provides power to the outlet, which turns on the transformer and activates the lights. With this option, you can either turn on the lights manually or you can wait and allow them to turn on automatically when the sun goes down.

Solar Lighting

Solar lights rely on the sun upon for power. They do best in extremely sunny conditions. One of the greatest things about lights like these is that they don’t require any wiring. Typically, they have LED bulbs, which means that they use very little energy. That makes them a lot more practical than halogen bulbs for solar applications.

The Downsides To Solar Lighting

While solar lighting is easy to install, it does have some drawbacks. For one thing, the lights themselves lack the brightness of lights that are powered by electricity. This usually has to do with where they are placed. Lights that aren’t directly in the sun won’t get as bright as lights that are located in sunny areas.

No matter what type of lighting you opt for, adding outdoor lights can brighten up your home.

Lighting Up Your Exterior Space

When properly installed, outdoor lighting can enhance your home, making it much more beautiful after dark. When incorrectly designed, however, it can look a little bit garish and overdone. The key to lighting the outside of your home is to use a light touch, only placing lights in the most important areas. If you need help designing your outdoor lighting, reach out to Houston Window Coverings today.

If you would like to discover more tips and tricks from Robert Huff Illuminationsvisit our blogCall or contact us today for more information!

Houston LED Landscape Lights: Is It Good For Outdoor Lighting Purposes?

Reasons To Use LED Landscape Lights For Outdoor Lighting In Houston

An LED (light-emitting diode) is a semiconductor that emits light. Light is produced when current flows in the semiconductor recombining with electron holes, hence releasing photon energy. LEDs are known to produce light in different spectrums and light. The color of light emitted is however dependent on the number of electrons needed to release energy across the bandgap. For white light, a layer of light-emitting phosphor or multiple semiconductors have to be used on the semiconductor device.

LED lights are common in both indoor and outdoor lighting. LED landscape lighting makes the perfect choice if looking for durability, energy efficiency, and even adaptability. When compared to other types of lighting, LED landscape lighting is far more beneficial and versatile, a reason many people are making the switch.

In addition to making it easy to keep your outdoors well lit, LED lights are relatively easy to maintain and don’t attract high lighting bills. That said, LED lights will help keep the landscape looking great without needing regular maintenance, as well as keep everyone around safe. Many city landscape designers choose to use this type of lighting in an attempt to not only make the city beautiful but safe for all.

While LEDs come in handy in landscape lighting, it would be advisable to choose the right type of LEDs for the job. Some of the factors you ought to consider when selecting LEDs include output light options, the specific project, and lighting design, among other preferences. Discussed below are some of the advantages and reasons you should consider using LED landscape lighting.

1. Compatibility With Detection Controls

LED landscape lighting systems can be attached to sensors and other control systems making it easy to control the intensity of light, as well as adjust brightness when needed. In addition to this, these systems can be programmed to turn on when the system doesn’t detect natural light, with the intensity increasing as the night progresses. In addition to this, the LEDs will dim progressively as daylight starts setting in in the morning.

There is a wide variety of high-quality LED landscape lighting system controls and products on the market that one can choose from. As mentioned earlier, most of these systems are compatible with various systems and can be programmed as per the client’s needs. As an added advantage, no manual intervention is required to switch the lights on or off. As long as the systems are programmed well, you can focus on other things knowing everything will work as desired. You also never have to worry about substantial energy bills either.

2. Adaptability & Flexibility To Various Landscapes

The LED lighting is very flexible and can be used in almost any landscape design. The LEDs are not only easy to install but can also be extended over time covering the entire landscape as per your wishes. As an added advantage, LEDs can be set to various moods. This is because you can switch from one color to another at the touch of a button. All that is needed to make this possible is to ensure you have the proper landscape lighting design, and a few low-voltage LED transformers if covering an extensive landscape.

Most landscape designers will start small then expand their focus over time. Depending on your budget and preferences, you can use LED landscape lighting for whatever designs you have. It’s worth noting that LED lighting systems make it possible to expand an existing line without necessarily starting over. This thus means you can make the landscape much safer with efficient lighting.

Unlike most light sources that emit lots of heat, LEDs emit very little heat in the form of IR. That said, you can be assured none of your fabrics or sensitive objects will be damaged by heat radiated by the same. Much of the heat produced by the LEDs is dispersed through its base.

3. They Are Perfect For Hard To Reach Areas & Spaces

You can control light intensity from these LEDs by lowering the forward current or by pulse-width modulation. This is the reason they are slowly becoming popular on car headlights. They also produce a stroboscopic effect when viewed from a distance, a factor that makes them stand out from other types of light.

LED lights can be installed in areas you would have considered impossible for a light fixture to be installed. LED landscape lights can, therefore, be used to light up the outdoors creating a backdrop for guests and strangers, especially at night. These come in handy when holding an outdoor event such as a party among other celebrations.

LED lights require minimal to no maintenance once installed. That said, you can have the lights installed and even leave them for years without turning them on. You won’t even have to replace the LEDs when you come back or need to use them. This is the reason why installing them in hard to reach areas won’t be a problem. That said, you can be assured of many years of service and longevity once the LED landscape lights are installed.

4. They Are An Energy-Efficient Option

LEDs are presumably the most energy-efficient landscape lighting options on the market today. These elements use up a fraction of what incandescent and even fluorescents use. You therefore never have to worry about substantial energy bills from keeping your landscape well-lit and looking beautiful at night. According to consumer reports, LED landscape lighting is at least 90% more energy-efficient as compared to other lighting options. As an added advantage, LEDs have a longer shelf life as well. They are capable of lasting up to 100,000 hours before requiring a replacement. This, therefore, saves you both time and money in terms of energy bills and replacements

5. LED Landscape Lights Are Eco-Friendly

If concerned about energy efficiency and particularly careful about your carbon footprint, you can then rest assured that LED lights are environmentally safe. Unlike incandescent bulbs, LEDs do not contain mercury or any other harmful compound. They are also 100% recyclable.

From the facts and benefits outlined above, it is evident that LEDs are the perfect choice for landscape lighting. In addition to their versatility and durability, you will be saving lots of money in energy bills and maintenance.

Call or contact us today if you require any information. Please feel free to visit our blog for more related articles.

Metals For Houston Outdoor Lighting Use: Which Will You Prefer?

Which Metal Is The Most Durable Outdoors?

When buying outdoor lighting it is crucial is to consider and weigh the properties of various metal options. Many people prioritize the appearance of the fixture and the light source but do not place much emphasis on the type of metal utilized.

Aluminum Outdoor Lighting

Although they are quite cheap aluminum fixtures are ranked lowest in quality among metals for outdoor lighting. They do not last for long in the outdoors. As time progresses, the aluminum gets oxidized and the paint begins to fade. Also, aluminum corrodes around salt hence it is not a good fit for outdoor lighting applications around coastal regions. However, aluminum fixtures’ life can be prolonged by powder coating which seals the aluminum.

Stainless Steel Outdoor Lighting

Stainless Steel reflects in the sun hence it is a good solution in modern applications. It has to be cleaned routinely to maintain its beauty and to prevent it from corroding. Stainless steel is guarded against rust by a coat of chromium oxide which can be weakened by dirt, debris, and sand. Outdoor stainless steel lighting installations need regular cleaning to preserve the chromium oxide layer to avert corrosion.

Brass Outdoor Lighting

Brass is an alloy that combines both zinc and copper producing a hard metal that is resilient in all conditions. Brass fixtures are highly durable and last for long periods. With time and as it is subjected to various elements brass will gradually turn darker or “patina” though it does not corrode making it an excellent choice for landscape and outdoor lighting. Brass fixtures perform remarkably well in coastal environments. Due to their durability and superior quality brass fixtures are priced at a premium to some of the alternative metals used for outdoor lighting.

Copper Outdoor Lighting

Copper is also an outstanding quality choice for lighting in the outdoors. However, it is not as solid as brass. To create a superior hybrid option that merges the beauty of copper and the durability of the brass some manufacturers coat brass fixtures with copper. Copper also darkens as it is gets exposed to various elements over time. One disadvantage of copper is that it is prone to theft since it is a valuable metal. As copper reserves diminish throughout the globe and prices increase due to demand this problem will only get worse.

Vivex Outdoor Lighting

Vivex, the ground-breaking material for outdoor lighting from Maxim Lighting is a higher quality option to polyurethane resin options commonly utilized in outdoor lighting. Vivex isn’t a resin. It is a one of a kind fabricated blend of latex composite that provides longevity and ground marble for strengthening fused using an ATP adhesive. Adenosine Triphosphate (ATP) is an adhesive whose quality has been checked at low temperatures in the range of -20°F as well as at extremely high temperatures exceeding 130°F. This material can cope even under higher temperatures and is also biodegradable and fire retardant. It is a great option for outdoor lighting fixtures in coastal areas since the material lasts for many years while still preserving its look.

To find out more, give us a call or contact us today. Please feel free to visit our blog for more related topics and articles.

Helpful Ideas To Investing In Houston Outdoor Lighting

7 Tips To Help You Get It Right When Investing In Outdoor Lighting

With summer now here with us, you most likely are gearing up to enjoying the great outdoors. Your backyard may become your favorite place to chill in when you are at home or when hosting your friends for lunch or dinner. Therefore, the fun should not stop when the sun sets because you do not have any outdoor lighting.

When investing in the outdoor lights, keep in mind that the lighting options are not created the same. Moreover, setting up the lights involves more than installing them on the walls or hanging string lights from the roof. You should strive to create an elegant ambiance, and this demands that you choose the right lighting fixture.

1. Include These Types

When planning the lighting, you need to account for three basic types: task, ambiance, and accent. That means you need to pick the right kind of lights for each of the three. The task lighting will be the lights you install to illuminate the walkway, deck, driveway, patio, and the security lights. The ambiance lighting will be what you fit on the walls, posts, and string from the roof. As for the accent lighting, you will be working with lights that enhance your landscaping; this can include options such as spotlights.

2. Calculate

Before heading out to buy the outdoor lights, you should know how many fixtures you need and which kind. For this, you will need to get a pen and paper and do some calculations. You will take the square footage of your yard and multiply it by 1.5 to estimate the required total wattage. Therefore, a 100sq. feet area will need 150watts.

3. Make Your Pick In Advance

After doing your calculations and figuring the wattage, you then will focus on the type of lighting fixtures you need. You will take into account their size and installation position before you go to buy them. You will need to draw a template of the layout on paper and use it to determine the placement of each light. For instance, for the patio at the back or the front porch, you will position the wall lights a height that is one-third that of the door.

4. Use LEDs

LEDs that the best investment when it comes to lighting up your backyard. The lights are cost-effective, less energy demanding, and last longer than the incandescent or halogen bulbs. Moreover, LEDs need little to no maintenance.

5. Seek Inspiration Inside Your Home

If you feel lost when figuring out the layout plan for the outdoor lights or what to pick, you can get some idea from inside your house and the arrangement of your outdoor space. Look at the garden and how the pathways flow, consider the size and design of your patio and then image what lighting fixtures will accentuate them. If you are thinking of creating a lit area of your outdoor dinners, then get some inspirations from your dining or living rooms.

6. Use Subtle Light For Entertainment Areas

Bright spotlights will be a distraction to your guests when they are seated enjoying their outdoor meal. As such, you should consider installing lamps with a soft glow. Subtlety is the name of the game when it comes to lighting up the outdoor dining areas, and the lights should be installed to give indirect lighting. Pendants, ceiling fans that have light kits, and lanterns are excellent options worth considering.

7. Think About Security

Lastly, remember that outdoor lighting is not just about enhancing the aesthetics of your yard. They also should help secure your home. Given this, you need fixtures that will ensure that all entry points are well lit. For instance, you can install wall lanterns on either side of the garage and a single lamp above the main door to light up the front porch. You can fit spotlights on the eaves of your roof at selected sides of the house that are in the shadows.

If you would like to discover more tips and tricks from Robert Huff Illuminationsvisit our blogCall or contact us today for more information!

Understanding You Should Choose Houston LED Lights

What Makes LED lights So Superior In Houston?

LED lights offer the most cost-effective way of lighting your home, office, or storefront. They are also an energy-efficient solution. The bulbs or lighting systems are based on LED technology. LEDs (light-emitting diodes) come into the scene with a bang and quickly took the helm as the most economical option when it comes to lighting. The can be found in major hardware and retailer stores across the country.

In as much as the LED lighting has taken the helm, many people are still using the fluorescent and halogen bulbs. They are yet to discover the advantages of the LEDs and why they have quickly become cheap and highly efficient lighting methods over recent years.

1. Incredible Efficiency

With an efficiency score of 80% – 90% for electrical energy generated compared to the traditional lighting options, it means that the LED converts electricity to light in a more effective way. That means that only 20% – 10% of the energy is lost during the process. For the incandescent bulbs, the figures are seemingly the reverse, with an energy loss of more than 80% in the form of heat.

2. Unsurpassed Longevity

Since the lights designed to have low carbon emissions, the LED lights are thus made to have a longer life span than other types of lights. The lights last six times longer than the conventional bulbs; therefore, they reduce the frequency of doing replacements. As a result, there are few lights needs, and this lowers the need for the resources need to make these lights.

The standard LED bulb has a lifespan of approximately 50,000 operational hours. Comparatively, this is 50 times longer than the lifespan of an incandescent bulb and roughly 20-25 times longer than for a halogen bulb. When the LED reaches its limit, it starts emitting a lower illumination that becomes less bright over time. This is very different for the standard bulbs that burn out and stop working.

3. Operate Using Low Voltage

Being low energy-consuming lighting options, the LEDs require little power to operate. As such, they will light up even when powered by a solar system. They do not generate any heat, thus they will not become hot to the touch. And the fact that they do not emit any UV rays makes them perfect for lighting textile and food displays.

95% of the energy directed into lighting LEDs is converted into light meaning only 5% is lost as heat. This makes the LEDs 80% more efficient than conventional lamps such as incandescent and fluorescent bulbs. The LED lights have a lower energy demand; a 36-watt LED will generate the same lighting intensity as would the typical fluorescent 84-watt lamp. The decrease in electricity demand means power plants are not pressured to deliver more energy, and this helps to lower greenhouse gas emissions.

4. Little Maintenance

The long lifespan means that the LEDs do not need frequent replacement compared to their incandescent counterparts. As such, this reduces the need for maintenance and the resource involved in such, especially is large public areas such as the train stations.

5. Environmentally Friendly

The LED technology fully embraces eco-friendly guidelines; as such, these lights do not have any toxic elements. Most of the fluorescents used in office contain harmful chemicals such as mercury that can pollute the environment when disposed of incorrectly. Moreover, such a thing should be done via the recommended channels such as via a registered waste carrier. The use of LEDs is devoid of these things; thus, you can cut down on costs and save time wasted in complying with the disposal protocols.

Furthermore, the LEDs do not emit any UV rays and are 100% recyclable; therefore, the best investment if you are keen on reducing your carbon footprint. To help put things into perspective, one LED lamp can serve you for a period in which you would have used roughly more than 25 incandescent bulbs. That means that you can save on production if you switch to the LEDs.

6. Durability

The LED lights have some of the most rugged components that can withstand the harshest of conditions. They are resistant to shock and vibrations thus less likely to break. Some of the fluorescent bulbs are affected by a drop in the temperatures more so those installed in outdoor spaces. The LED lamps are not susceptible to such climatic changes.

7. Instantaneous Illumination

When you turn on an LED lamp, it lights up immediately and emits the set full range of illumination. That is why these lights are becoming a standard feature in infrastructure projects such as traffic lights and signals. The constant on and off switching of these lights do not impact the longevity and illumination intensity of the LEDs. Such performance is a sharp contrast to the conventional bulbs that drastically lose their operational life when they are repeatedly turned on and off within very short periods.

8. Many Color Options

While white lights are a top preference for many, you also can find the LEDs in an array of colors. Some LED modules even have a mix of colors in one lighting device; these are called RGB modules. They are designed to achieve a broad spectrum of colors when operated.

9. A Compact Solution

The lights can be made to be as small are 2mm. That means that they can be used or fitted in some of the hard to reach places that have limited to no lighting.

10. Assortment Of Design Options

Based on their design and technology, these lights offer flexibility, which means they can be made to conform to any shape for different applications. Moreover, they can also be set up in a controlled system while individual diodes can be dimmed to manage the level of illumination in a given area. With options ranging from color variations and lighting intensity, LEDs suffice to meet different needs and demands. The LEDs can be found in cars, classes, medical rooms, airplanes, and factories.

11. A Better Distribution Of Light

The intensity and clarity of the light that the LEDs emit means that you can focus the light in one direction without having to depend on a reflector. And those with a dimmer function offer greater control. As such, it is possible to manage the amount of light to distribute over a given area.

The Verdict

LEDs are the way of the future. They are eco-friendly, cost-effective, and energy-saving lighting solutions for residential and commercial areas and applications. Therefore, you should make the smart move today and switch to LED bulbs.

If you would like to discover more tips and tricks from Robert Huff Illuminationsvisit our blogCall or contact us today for more information!

A Guide For Choosing LED Lights In Houston

What Makes Houston LED Lights So Superior?

LED lights offer the most cost-effective way of lighting your home, office, or storefront. They are also an energy-efficient solution. The bulbs or lighting systems are based on LED technology. LEDs (light-emitting diodes) come into the scene with a bang and quickly took the helm as the most economical option when it comes to lighting. The can be found in major hardware and retailer stores across the country.

In as much as the LED lighting has taken the helm, many people are still using the fluorescent and halogen bulbs. They are yet to discover the advantages of the LEDs and why they have quickly become cheap and highly efficient lighting methods over recent years.

1. Incredible Efficiency

With an efficiency score of 80% – 90% for electrical energy generated compared to the traditional lighting options, it means that the LED converts electricity to light in a more effective way. That means that only 20% – 10% of the energy is lost during the process. For the incandescent bulbs, the figures are seemingly the reverse, with an energy loss of more than 80% in the form of heat.

2. Unsurpassed Longevity

Since the lights designed to have low carbon emissions, the LED lights are thus made to have a longer life span than other types of lights. The lights last six times longer than the conventional bulbs; therefore, they reduce the frequency of doing replacements. As a result, there are few lights needs, and this lowers the need for the resources need to make these lights.

The standard LED bulb has a lifespan of approximately 50,000 operational hours. Comparatively, this is 50 times longer than the lifespan of an incandescent bulb and roughly 20-25 times longer than for a halogen bulb. When the LED reaches its limit, it starts emitting a lower illumination that becomes less bright over time. This is very different for the standard bulbs that burn out and stop working.

3. Operate Using Low Voltage

Being low energy-consuming lighting options, the LEDs require little power to operate. As such, they will light up even when powered by a solar system. They do not generate any heat, thus they will not become hot to the touch. And the fact that they do not emit any UV rays makes them perfect for lighting textile and food displays.

95% of the energy directed into lighting LEDs is converted into light meaning only 5% is lost as heat. This makes the LEDs 80% more efficient than conventional lamps such as incandescent and fluorescent bulbs. The LED lights have a lower energy demand; a 36-watt LED will generate the same lighting intensity as would the typical fluorescent 84-watt lamp. The decrease in electricity demand means power plants are not pressured to deliver more energy, and this helps to lower greenhouse gas emissions.

4. Little Maintenance

The long lifespan means that the LEDs do not need frequent replacement compared to their incandescent counterparts. As such, this reduces the need for maintenance and the resource involved for such, especially is large public areas such as the train stations.

5. Environmentally Friendly

The LED technology fully embraces eco-friendly guidelines; as such, these lights do not have any toxic elements. Most of the fluorescents used in office contain harmful chemicals such as mercury that can pollute the environment when disposed of incorrectly. Moreover, such a thing should be done via the recommended channels such as via a registered waste carrier. The use of LEDs is devoid of these things; thus, you can cut down on costs and save time wasted in complying with the disposal protocols.

Furthermore, the LEDs do not emit any UV rays and are 100% recyclable; therefore, the best investment if you are keen on reducing your carbon footprint. To help put things into perspective, one LED lamp can serve you for a period in which you would have used roughly more than 25 incandescent bulbs. That means that you can save on production if you switch to the LEDs.

6. Durability

The LED lights have some of the most rugged components that can withstand the harshest of conditions. They are resistant to shock and vibrations thus less likely to break. Some of the fluorescent bulbs are affected by a drop in the temperatures more so those installed in outdoor spaces. The LED lamps are not susceptible to such climatic changes.

7. Instantaneous Illumination

When you turn on an LED lamp, it lights up immediately and emits the set full range of illumination. That is why these lights are becoming a standard feature in infrastructure projects such as traffic lights and signals. The constant on and off switching of these lights do not impact the longevity and illumination intensity of the LEDs. Such performance is a sharp contrast to the conventional bulbs that drastically lose their operational life when they are repeatedly turned on and off within very short periods.

8. Many Color Options

While white lights are a top preference for many, you also can find the LEDs in an array of colors. Some LED modules even have a mix of colors in one lighting device; these are called RGB modules. They are designed to achieve a broad spectrum of colors when operated.

9. A Compact Solution

The lights can be made to be as small are 2mm. That means that they can be used or fitted in some of the hard to reach places that have limited to no lighting.

10. Assortment Of Design Options

Based on their design and technology, these lights offer flexibility, which means they can be made to conform to any shape for different applications. Moreover, they can also be set up in a controlled system while individual diodes can be dimmed to manage the level of illumination in a given area. With options ranging from color variations and lighting intensity, LEDs suffice to meet different needs and demands. The LEDs can be found in cars, classes, medical rooms, airplanes, and factories.

11. A Better Distribution Of Light

The intensity and clarity of the light that the LEDs emit means that you can focus the light in one direction without having to depend on a reflector. And those with a dimmer function offer greater control. As such, it is possible to manage the amount of light to distribute over a given area.

The Verdict

LEDs are the way of the future. They are eco-friendly, cost-effective, and energy-saving lighting solutions for residential and commercial areas and applications. Therefore, you should make the smart move today and switch to LED bulbs.

If you would like to discover more tips and tricks from Robert Huff Illuminationsvisit our blogCall or contact us today for more information!